• Email: rahamnsani2020@gmail.com
  • Phone: 01723793694, 01711164109

Best Con Super Rebool / Shutter Oil / Form Oil /

  • home Product
  • Best Con Super Rebool / Shutter Oil / Form Oil /


    Best Con Super Rebool/ Release Oil
    Oil based shutter release agent
    Product Description
    Best Con Super Rebool Oil is a carefully blended combination of refined emulsified mineral oil.
    When mixed with water at a recommended dilution, it produces a thin film of stable
    release agent.
    Uses Best Con Super Rebool Oil when applied to steel, plastic and timber formwork allows clean, fast
    and easy stripping.
    Characteristics /Advantages
    The advantages of Best Con Super Rebool Oil are :
     Good adhesion to the formwork
     Undisturbed by concrete
     Reduces concrete contamination
     All tools can be cleaned with water
    Product Data Form
    Appearance / Colour Yellowish clear oily liquid
    Packaging 20ltrs, 200ltrs
    Storage Conditions /Shelf Life 12 months from date of production if stored properly in original unopened,
    undamaged, sealed packaging in dry condition at temperatures +10 to +40°C.
    Protect from frost, direct sunlight and contamination. Opened units should be stored
    Technical Data
    Chemical Base Blend of mineral/ Natural Oils
    Relative Density ~0.84 kg/l at 25°C
    Application Details
    Consumption Timber : 25 m
    per litre of diluted material at a dilution rate of Best Con Super Rebool Oil to
    water = 1:2 – 1:4.
    Steel/Plastic : Approximately double coverage to the above would be achieved
    The above consumption depends on the surface texture and porosity of the form
    work. Actual coverage to be finalised on the basis of site trials.
    Application Method/Tools
    First Best Con Super Rebool Oil is to be taken in a mixing container. Proportionate water is to
    be added to it in parts with constant stirring. One coat is applied by brush, roller or

    Conditions /Limitations
    Ambient Temperature 0°C min. / +50°C max.
    Application Instructions
    Notes on Application /Limitations
    Occasional stirring is necessary during application. New formwork should be kept
    dry and after Application
    Conditions /
    Ambient Temperature 0°C min. / +50°C max.
    Notes on Application /
    Occasional stirring is necessary during application. New formwork should be kept
    dry and after Best Con Super Rebool Oil has been applied, it should be protected from rain and
    Do not moist the applied coating, even when the surface is dry. Best Con Super Rebool Oil
    should be allowed to dry before concreting takes place.
    Value Base All technical data stated in this Product Data Sheet are based on laboratory tests.
    Actual measured data may vary due to circumstances beyond our control.
    Health and Safety
    For information and advice on the safe handling, storage and disposal of chemical
    products, users shall refer to the most recent Material Safety Data Sheet containing
    physical, ecological, toxicological and other safety-related data.
    Legal Notes The information, and, in particular, the recommendations relating to the application
    and end-use of Sika products, are given in good faith based on Sika’s current
    knowledge and experience of the products when properly stored, handled and
    applied under normal conditions in accordance with Sika’s recommendations. In
    practice, the differences in materials, substrates and actual site conditions are such
    that no warranty in respect of merchantability or of fitness for a particular purpose,
    nor any liability arising out of any legal relationship whatsoever, can be inferred
    either from this information, or from any written recommendations, or from any other
    advice offered. The user of the product must test the product’s suitability for the
    intended application and purpose. Sika reserves the right to change the properties
    of its products. The proprietary rights of third parties must be observed. All orders
    are accepted subject to our current terms of sale and delivery. Users must always
    refer to the most recent issue of the local Product Data She

    be our partner

    our Clients